Anti-Vibe Light Mounts for the Trail Tech HID light system. These light mounts (clamps) come in three different sizes/diameters (7/8", 1", 1-1/8") for different circular bar dimensions (handle bars/crash guards/frame), and come in either horizontal or vertical alignment.
"Horizontal" means the brackets are designed to fit onto a bar that is horizontal, with the light mounting stud projecting vertically.
"Vertical" means the brackets are designed to fit onto a bar that is vertical, with the light mounting stud projecting horizontally.
You can use these mounts for auxiliary lights, for GPS brackets, for cell phone brackets, or other applications.
Standard and Metric Matrix
|
Standard Dimensions
|
7/8"
|
1"
|
1-1/8"
|
|
Horizontal (Metric)
|
22.2
|
25.4
|
28.6
|
|
Vertical (Metric)
|
22.2
|
25.4
|
N/A
|
Frame mounted lights are the perfect solution to complement or replace stock lights. These clamps will fit almost any application for exposed round frame vehicles.
- Easy to Install
- CNC machined from solid 6061 billet aluminum
- Hand polished to a high gloss
- Clear coated for a long lasting bright finish
The mounts on this page contain 2 frame clamps only, the lights are sold separately.
These mounts are designed for Trail Tech lights with anti-vibe light posts. (lights with anti vibe posts can be special ordered). Anti-vibe posts have a 10mm diameter, but 2 sides of the post have been machined flat (squished oval cross section). The mounts themselves have a flattened oval hole beneath the rubber bushings. The squished oval post of the lights fit in to the oval hole of the mounts, and this prevents the lights from turning left or right.
You can modify these bar mounts to fit a traditional round threaded 10mm post, like the posts on the Trail Tech and IPF lights we offer on our website. Remove the rubber bushing and ream the hole with a stepped drill bit, so the hole is completely round. Replace the rubber bushing and the threaded post will fit. This process takes a couple minutes but it's worth the effort. If you don't have your own tools contact us and we'll modify the mounts in our shop for a $10 fee.
Inventory Update 1-9-12 We currently have these sizes in stock. Sale limited to stock on hand.
2 pairs 1-1/8" horizontal mounts Sorry, sold out of that size
1 pair 1" vertical mounts Sorry, sold out of that size
1 pair 7/8" vertical mounts YES !
